What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
10.06.2025 04:50

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
It also is a device that limits the change in current flow.
Measles case confirmed in Allegan County, officials provide locations of exposure - WWMT
This one hit behind the barn.
The third is lightning and “how it gets conducted into a home.”
But it can get overloaded, and no longer works.
Has a psychic ever made a crazy prediction that turned out to be true?
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
He then describes the function of a fuse.
First Sentence:
Japanese culture: Is it true adult adoption is common in Japan?
[old diagram got deleted by accident]
This is where the MOV conducts again, and dissipated the energy.
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Some in Steelers Building Wanted to Go Back to Justin Fields in 2024 - Sports Illustrated
Here is a simplified AC power diagram.
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
One
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
but this device (an Inductor) … impedes the rapid changes in the current.
The MOV will conduct when the voltage exceeds 50% of line voltage.
what exactly is a ‘surge’ protector?
Two space vets added to Astronaut Hall of Fame as one awaits launch - collectSPACE.com
He then describes Rainy Season and Lightning.
This device then solves the entire problem.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
nine
In schematic diagrams this is the symbol for a fuse:
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
Europe stock markets fall after Trump doubles steel tariffs - CNBC
2024–10–16 [ OO OLAOYE OYEBODE ]
eight
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
Inside Ukraine’s audacious drone attack on Russian air bases - CNN
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
What is lightning?
This is where this question deviates from being a 'generic' question, and becomes more specific.
How do people break a narcissist man's ego?
It seems Mohan does not understand the difference between a comment and an Answer.
(Dc diagram shown, AC is similar).
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
I post the exact comment here.
At one ohm, the resistor has a maximum of 1 watt power.
2024–10–10[John johnson John Johnson ]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
There are three different concepts here that are getting confused.
the problem then depends on "how fast does the fuse operate?".
Edit 2024–10.
So, the voltage could go up to 500 volts, and the fuse will not open up.
A circuit breaker is similar, but is resettable.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
These are simplified answers to the original question, and does not change anything I wrote above.
Now when you have a certain ac resistance, then a current flows in a loop.
There are two important concepts here.
But… the neutral is now “floating” because of the 1 ohm resistance.
A fuse is a non-resetable over current circuit protector.
He then asserts :
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
The bolt then partially travels down the line to your home.
Barnstars:
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
[image of Common-mode choke]
An AC voltage/ current source, and an ac inductive load.
These devices are installed between the “hot” and “neutral” and protective ground.
The other is “what does a “fuse” do?”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
For this case there are devices called Metal oxide varistors (MOV).
What does a fuse do?
Upvotes:
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
but I think this circuit , shows a few more pieces.
Because the load is inductive, the current lags the voltage.(by a bit).
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
At least they know the answer if they wanted it.
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
2024–10–14 [Omar Gharbi Omar Gharbi ]
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
One is “what exactly is in a ‘surge protector’ ? ”
so, what happens?
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
a photo is worth a thousand words.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
This is 'the assistant's answer'